PCD Dies

PCD Dies(Polycrystalline Diamond Dies,Wire Drawing Dies,CD Dies) used for drawing kinds of wire such as aluminum,tungsten,Mo

PCD Dies(Polycrystalline Diamond Dies,Wire Drawing Dies,CD Dies) used for drawing kinds of wire such as 

stainless steel, aluminum, copper,nickel, high carbon, tungsten, molybdenum and their alloys etc..

Various types of PCD Dies

1.  Dies using imported PCD2.  Dies  using domestic PCD3.  Dies using domestic High Accuracy PCD 4.  Dies using domestic CD5.  Dies using domestic CVD

Die Parameters(unit: mm)

Hole SizeΦd	Hole Size Tolerance	Ovality	CasingΦD×H
Φ0.100~0.200	≤0.0015	≤0.0008	Φ25×8
Φ0.201~0.400	≤0.0020	≤0.0010	Φ25×8
Φ0.401~0.500	≤0.0025	≤0.0015	Φ30×10
Φ0.501~0.750	≤0.0030	≤0.0020	Φ30×10
Φ0.751~1.50	≤0.0035	≤0.0025	Φ37×12
Φ1.501~2.00	≤0.0050	≤0.0030	Φ37×12
Φ2.001~3.00	≤0.0070	≤0.0050	Φ41×20
Φ3.001~4.60	≤0.010	≤0.0080	Φ41×20
Φ4.601~8.00	≤0.015	≤0.012	Φ41×24

 Note: Specification only for reference. Special die blank and casing are available upon request. 

Die Blanks:

1. Henan Sifang PCD Die Blank

2. GE Compax Die Blank

3. DeBeers Syndie Die Blank

4. Sumitomo SumiDIA Die Blank

The die blanks are of high accuracy, high tensile resistance, good anti-frangibility, abrasion resistance and thermal conductivity, as well as wide reconditioning range and good consistency of the die hole.

ADDMA8911	Die  Blank			HoleSize	Hole SizeTolerance
	GECompax	DeBeersSyndie	SumitomoSumiDIA WD
D6	5010	H210	WD705WD805	0.10~0.499	0.001
D12	5015	H315	WD710WD810	0.50~0.999	0.003
D15	5025	H525	WD715WD815	1.00~1.499	0.005
D18	5035	R429	WD720WD820	1.50~1.999	0.007
D21	5530	R738	WD925	2.00~2.999	0.007
D24	5535	R753	WD930	3.00~4.599	0.010
D27	5730	R1285	WD940	4.60~5.799	0.015
D30	5735	R1212	WD950	5.80~7.599	0.015

Note: Specification only for reference, special die blank and casting are available upon request.

PCD Dies